GEM-12

SURGE PROTECTOR - Part #: 801929

SURGE PROTECTOR 115V (OPTION) FOR FIELD INSTALLATION.

PLUG IN STYLE. PROTECTS COMPRESSOR ONLY. There is little chance that the lighting would be affected by power surges in U.S. Surge protectors is what should be sold in the United States not a voltage regulator. POWER SWITCH must be disconnect for this to work. PLUG COMPRESSOR POWER CORD ONLY INTO SURGE PROTECTOR. DO NO PLUG MAIN POWER CORD INTO PROTECTOR!

SURGE PROTECTOR PME-110-TR 115V 1/3HP & LOWER NOT AVAILABLE FOR R-290/HC UNITS PLUG IN STYLE.. PROTECTS COMPRESSOR ONLY. Shut off power to compressor for 180 seconds if voltage goes below 105 or above 126V. Every 180 seconds checks power and comes on when within correct range. All other lighting/motors remain on if there is sufficient power. FOR 1/3HP OR LESS MODELS. PLUG COMPRESSOR POWER CORD ONLY INTO SURGE PROTECTOR. DO NO PLUG MAIN POWER CORD INTO PROTECTOR!

SURGE PROTECTOR - Part #: 842506

SURGE PROTECTOR 115V PFN110-MD MAXIMUM OF 1 HP HARDWIRE , MAXIMUM OF 1 HP. PROTECTS COMPRESSOR ONLY. Shut off power to compressor for 180 seconds if voltage goes below 105 or above 126V. Every 180 seconds checks power and comes on when within correct range. All other lighting/motors remain on if there is sufficient power. FIELD INSTALL WOULD VOID UL APPROVAL AND TRUE''''''''S WARRANTY. NOT AVAILABLE FOR R-290/HC UNITS

SWITCH - Part #: 801924

SWITCH, TOGGLE HBL 11SP TO SHUT OFF POWER TO SERVICE.

SWITCH - Part #: 842250

SWITCH, ROCKER 74-409933-008 00/S/B 049933018 0W/18GA OVER

SWITCH - Part #: 953404

SWITCH, TOGGLE, CARLING #111-16-73 W/ ON/OFF PLATE ALL VOLTAGES - REPLACED 801901 TOGGLE SWITCH

TAPE - Part #: 820279

TAPE, 1" X 65' BD525 BUTYL TWO-WAY TAPE

TAPE - Part #: 937489

TAPE, 1/2" X 55 YD, #62932 DOUBLE SIDED TAPE USED TO SECURE GLASS INSERT INTO FRAME

THERMOMETER - Part #: 800321

THERMOMETER HB-120L-VERTICAL WITH LOGO & SCREW HOLE

TIMER - Part #: 831971

TIMER, DEFROST M-182-013-66332 8 HOUR 8 HR. REPLACES 831921 ON 208V MODELS. 831912 ON 115V MODELS. 831971 WAS A M-179 NOW IS A M182.

TIMER - Part #: 831980

TIMER, DEFROST XC2001-21 8HR/20 MIN 220V 50 HZ 8HR/20 MIN 220V 50 HZ.. REPLACES THE 831921 M-178-1 230V 50/60 HZ 6HR/20 MIN

TOOL - Part #: 832270

SCREWDRIVER, T-7 TORX 36512 T7 X 50MM USED TO CALIBRATED DANFOSS CONTROL

TUBE - Part #: 891669

COPPER TUBE STRAIGHT 1/4 X 13 GDM-10/12/T-19F/19FZ

VALVE - Part #: 800111

VALVE E3S130 SOLENOID REMOTE COMPONENT SOLENOID BODY. USE WITH 115/1/60 COIL

VALVE - Part #: 800113

REMOTE COMPONENT MKE SOLENOID COIL

VALVE - Part #: 813300

VALVE EXPANSION EBFSE-AAAC INLET STRAINER

VOLTAGE REGULATOR - Part #: 842504

VOLTAGE REGULATOR ASP10-11 HARDWIRED. PROTECTS THE COMPRESSOR AND ALL ELECTRICAL PARTS. FOR UP TO 10 AMPS. FIELD INSTALLATION VOIDS UL APPROVAL AND TRUE''S WARRANTY. **NOT AVAILABLE FOR R-290/HC UNITS**

WASHER - Part #: 830605

WASHER, 3/8, USS, FLAT, STEEL ZINC PLATED

WASHER - Part #: 830631

WASHER, LOCK 1/2" SPLIT ZINC PLATED LOCKWASHER-1/2" SPLIT

WIRE HARNESS - Part #: 895137

WIRE HARNESS, GDM-12 USED TO REWIRE CABINET

WIRE HARNESS - Part #: 971922

WIRE HARNESS, UPS COOLERS UNIVERSAL WIRE HARNESS FOR ALL COOLERS

WRENCH - Part #: 801556-027

WRENCH, EXTRA LONG LEG LEVELER BLK USED TO ADJUST HEIGHT OF LEVELER. REPLACES 830442 - IT WILL WORK ON BOTH 801555 AND 996897 LEVELING SCREW REPLACES 801556

WRENCH - Part #: 830271

WRENCH, CASTOR 1M000192797 LARGE FOR 2-1/2" CASTERS USED W/ CASTORS THAT HAVE A LARGE TIGHTENING NUT ON TOP OF CASTOR . HAS LARGE U SHAPED HEAD WITH HEX HEAD INSIDE OPENING.